My Candy CMD146 washer/dryer gets to a certain point on the 40 cycle then stops. No drain, rinse, condition or spin? I have to change to drain cycle, wait, then spin, wait. Washing is still full of powder. Help! Machine is 2 years old, and very good until now.
I have tried to remove filter but it will not come out. The white twist dial just comes off on its own, and there is no way to get the filter out?
Jeff.
January 2014
Try taking the panel of at the front floor level . On the left is a fillter you need to use a small pozi driver to slaken the screw in the cap that will relese the fillter cap so you can turn anti clock wise and remove it . there may be a build up of rubish stoping the pump. This will once re fited make things work
Trevor Lewis
May 2012
i have exactly the same problem, can anyone help please?
scooter
September 2010
I've also got the same problem, any one know what the problem is???
Mark
March 2010
I have the exact same problem and I've had the filter out and it's clean.
Lisa
February 2010
remove the pump and clean it out.
alan
January 2010
did you fix it or call an engineer ?.
I have the same problem
Eric
December 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.