zanussi 6744??

Tony, If you still have a problem mine has now been resolved by replacing the circuit board. At £90 you want to make sure the heater and temp sensor are ok first though.

Mark
January 2006

I have exactly the same problem. To check your heater measure the resistance across the terminals with the connector removed, should be approx 26 ohms.
Having spoken to Zanussi service they advised to check the temp sensor which screws into the bottom of the dishwasher in front right corner (2 orange wires to it), they couldn't advise me of the resistance but it should have a reading of some sort other than open/closed circuit. I found open circuit on mine - hopefully this is the cause.

Mark
December 2005

sounds like the heater or stat if not heating up

tony
December 2005