Should probably note that when you fill it up at the reservoir that there is a plug on the opposite side of the radiator that you will have to open so that the radiator fills right up, once the water starts to come out of this plug close it over, make sure that there is a decent water level in the reservoir then cap that.
Once you have done this there is a bleed nipple at the back left hand side of your engine on one of the water hoses(looks like a valve cap), take this off,start the engine and wait till it come up like a fountain to make sure all the air is bled out of the system.
If you don't do this there is a chance of head gasket damage.
ck
March 2009
on top of the radiator there will be a cap, take that off and just pour in the water.
caution!!!! do not do while engine is hot !!!
liam
March 2009
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix cars.