Zanussi washer drier Model WDT.1075?

Remove the top panel (two bolts either side at rear). At the top there are two screws attaching the top frame to the rear panel - remove them, and the spring guards too. You may want to reposition the bolts through to the front panel in order to keep maximum rigidity. On each side, a few inches up from the bottom are two blanking plugs. Remove the plugs and the two bolts they reveal. Back to the top, remove the plastic insert which allows the water pipes and mains cable to enter the machine - there are tabs each side which can be held back with a screwdriver blade. Then the rear panel should just pull off...

Tim
August 2014

It a long time ago, but did you ever get this sorted out? I have the same problem with my WDT 1085, but can't seem to manage to get the back off. Thanks in advance. If you know, please e-mail me on peterhavenaar@hotmail.com

Peter Havenaar
March 2006