cannot get my sky + box to come out of standby,have tried to reset by disconnecting mains supply but still no joy.fan and hard drive appear to come on but still no green light. any ideas anyone?
Try this at your own risk. Pull out mains then disconnect power lead conneted to hard drive from the board, reconnect mains and switch on. After 3 minutes your sky box should switch on (green light) and work as an ordinary sky box. If this happens then it is a good chance your hard drive needs to be replaced (160mb seagate in my case)
nice people
February 2009
to get your thomson+skybox out of standby, first press and hold the left and right arrow buttons on eather side of the select button, then turn off power for a bit then turn on again still holding button till green light comes on ,
fred
February 2009
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix satellite receivers.