4 hours ago: Will I need to replace my garden tap?

Mend > Home Heating Systems

Mend Ideal HE30 Boiler Heating Combi

Problem with Ideal Isar HE30 combi boiler?

Our heating and hot water went off this evening. We checked the boiler and there was no illuminated display at all? Checked the electrics which were leading to the boiler - they were ok. When its switched on there is a slight ticking sound for a few seconds then it stops. Does anyone know what the problem could be?

Tina
January 2009
Hello sorry I didnt say thanku but im struggling to see what im typing so tryin to make it short .ive lost my reading glasses.kind reguards pauline

pauline hayel
March 2014
Hello I need to raise pressure on my isar h30 boiler. Where is the tap or valve. Pauline

pauline hayel
March 2014
i have a espirit combi boiler keeps losing pressure but we have no leaks

KENNY
January 2014
L...F comes up as fault reset works for a while then goes into fault again but when im not there.Replaced ignition and flame detection probes, still having same fault

olly
April 2013
in my isar 30 boiler, how do i turn the hot water dow, its scalding hot when I turn the tap on and I have two young kids to worry about scalding themselves. thanks.

john d
August 2012
when heating is on . temperature pressure gauge is not settled on 1 bar . point keeps flicking between 1 bar and 2 bar k

k.c.
April 2012
This is the worst boiler i have ever had installed.save your selves the stress and money and scrap it asap

domdididom
March 2012
I too have an Isar HE30 boiler. I have had nothing but trouble with it, and have also had a PCB replacement. Sometimes when it goes wrong my friends want to touch the controls, but I jump up hysterically saying don't touch, it is very temperamental. Tonight it has been the "guest" at my dinner party, as we have had this as the most spoken about "thing". It is a rubbish rubbish and more rubbish boiler. I have lit the log burner now to keep warm.

Bertie the unrequited boiler lover.
February 2011
water leak only when i start my centrail heating up

john 12
April 2010
i have had my ideal isar he30 fitted 2 days L and F fault told need pcb it is freezing cold phoned insulation company today about problem my responce was the boiler worked before we left you need to get an engineer from the boiler company can not get a call out for 3days left without heating and hot water i am disabled and have 4children the youngest aged 4 i would not recommend a heating system under the warmfront scheme .

mrs J.Smith
January 2010
Hi I am also having the same problem with L9, I have already had a new PCB, new pump and numerous other parts however these are costing a fortune, It is the 3rd PCB I have had, just wondering if it is worth continuing!!

Rachel
October 2009
My 86 year old Mother had a Ideal HE30 Boiler fitted under the Warmfront scheme in July 2007, nearly 3 weeks ago she had her bathroom papered, the heating was fine when on, then she was away a couple of days so we then turned it on for her and noticed she had no hot water, hubby looked at boiler and noticed a reading L9 , we switched it off and rang the hot line who asked him to switch it back on, a bar came up on the symbol straight line the pressure gauge started to pulsate and water strated to leake from boiler at back she told him to close it down and she would send a engineer out.
Next day he turned up and before he got through door it was obvious he did'nt want to be here, he went straight upstairs opened airing cupboard door he could see that the bathroom at been decorated and straightaway said you have decorated and removed the radiator and blown the boiler mate, my husband made it clear that at no time had the radiator been disconnected, he said well you're blown it, my husband asked him to explain how and he just repeated himself.
He was that ignorant that my husband had to walk away and l telephoned my son to come round and wait with me, l watched him for 29 minutes unknown to him all he did was stare at the boiler prior to this he just fitted the link pipe and said there no water in the system and the compustion cover not securable 1/4 nut dislodged and cannot close chamber (the only people ever to have the cover off are the engineers when serviced) , my husband told him well it's leaking out he did nothing else.
He left and when l telephoned to see what was going to happen l was told it was down to us moving the radiator.
We complained further to the complaints dept ran by Eaga? they said it was not honoured because the decorator was not Corgi registered, nor was the lady on the other end of the phone when she told us what to do.
At this we contacted our Home ins company who organised yet again for Homeserve to come out they did give a very good inspection and came up with the idea that it was the Air Valve so they ordered one and fitted (the old one was covered inside with corosion) but then they came across a leak which now they say that the Heat Exchanger needs replacing with a cost of £400 plus but more than likely will need a new boiler at a cost of £800 -1000 fitting plus the boiler.
This boiler had 2 years warranty and was also extended, we have no idea what is going on, we or the decorator who is a professional person, would be grateful for any guide any kind person can give me

Pat
May 2009
how long will it take to fix? mine just went bust. No illumination at all. i take it it's related to PCB too. 2nd time the boiler's gone bust (1st time was different problem).

K
March 2009
if there is no display it could be water leaking on the wire between the user control and pcb which is easy to see by white or singe marks, or the pcb its self, if there is a large dint on the pcb then it is that. as for the explosion it is probobly the spark gap an the ignition electrode as these bend under heating

Rich
February 2009
Is it correct that on occcasions when the boiler fires up there is a sound that does not seem to be an explosion sound but that of a door banging. Any Ideas.Thanks

Cherry
February 2009
happened to mine last year. PCB gone.

Bunslinger
January 2009
It sounds like the P.C.B (printed circuit board).

ED.
January 2009
Would be inclined to steer towards a new circuit board

a
January 2009

Related Questions ...

Mend Worcester Bosch Combi Boiler Home Heating
1

Worcester Bosch 532/i Combi Boiler?

worcester bosch 532/i boiler. when the hot tap calls for water the boiler runs ok heating up the water to the... [Read more]
Mend boiler heating caravan
1

Britony Combi Se boiler 40 & 80 lights flashing?

I don't have heating or hot water. How do I fix it please? Could this have been caused by the water to my... [Read more]
Mend boiler heating combi
1

Halstead ace combi boiler?

Hi my halstead ace boiler isn’t heating water but my heating is working ok what can I do to fix
Mend central heating hot water megaflow
1

Can't get hot water working, heating okay?

I've just moved house and have an Intergas Combi Compact Eco RF gas boiler with a separate Megaflow tank with ... [Read more]
Mend boiler heating combi
1

how do i change/replace morco feb24ed combi boiler diaphragm?

hi, diaphragm needs changing when turning on hot tap the central heating comes on at the same time, morco feb ... [Read more]
Mend combi boiler burner vokera
6

Vokera Maxin 28e combi boiler, DHW runs hot and cold?

A few months ago DHW temperature started to fluctuate mildly between hot and warm. This problem got worse so a... [Read more]
Mend boiler heating radiators
1

My radiators not heating up?

I have a 281 G/star combi boiler and have been away for 1 week and now back . Boiler is heating water fine bu... [Read more]
Mend boiler heating kettling
1

Volkera compact 29A Combi always making kettling noise?

We have installed Volkera compact 29A Combi. I switch my boiler from hotwater supply to central heating.It st... [Read more]
Mend boiler diverter valve intermittent fault
1

Baxi Combi Instant HE80 boiler?

Intermittent fault on the hot water. Sometimes it comes on but when it doesn't I can sometimes get it on by tu... [Read more]
Mend boiler radiators pressure
2

I only have heating downstairs... ?

Hi all. My heating has been a bit funny. The radiators upstairs aren't heating up at all and the ones downstai... [Read more]
Mend combi boiler no hot water home heating
2

worcester24i rsf?

worcester 24i rsf combi boiler.no hot water when i turn hot water taps on heating is ok
Mend combi boiler central heating radiators
1

why is my combi boiler not staying fired for central heating. water fine?

my Glow worm combi has been having odd days when the central heating isn't working but then has been ok again ... [Read more]
Mend boiler heating error code
2

how to fix f22 problem on boiler?

I don`t have a combi boiler but i do have a f22 problem.The pressure is fine but when i switch the water on,th... [Read more]
Mend combi heating flashing
1

combi boiler not heating water or central heating ?

green light on boiler is flashing but when I turn water or heating on it sounds like it gonna fire up but ever... [Read more]
Mend heating thermostat combi
1

ideal combi 30 boiler heating not working on timer only override?

The heating only comes on when I override the timeclock if in timer mode the timeclock keeps the correct time ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...