how do i replace heating element on beko dvc61 fan oven?

SWITCH OFF POWER AT MAIN SUPPLY.
Carefully remove the entire back cover.
DON'T LET THIS COVER FALL! THERE ARE MANY WIRES THAT WILL BECOME DETATCHED.
Pull off the 3 terminal wires from the element spades terminals.
YOU DO NOT NEED TO REMOVE THE OVEN DOOR.
Open oven and undo 2 screws holding the fan cover plate at the rear of the oven. Just lower this plate down and remove the 2 screws holding the round heating element in place.
USE A FLASHLIGHT TO LOCATE THE ELEMENT FIXING SCREWS.
Withdraw Element.
TAKE CARE NOT TO BEND THE FAN BLADES.
Place new Element in position and screw into place.
Reassembly is simply a reverse procedure.
Some sharp edges and greasy metal to take care with.

Gloucester Fella
March 2010