Chrysler Neon Immobilser stuck & No key fob??!!?

ring dan smith on 07592066416 :) he'll know

lou meade
February 2011

have the same problem, is it treu that if you cut all cabels en put them back together without the immobilser that you can start it normaly ?

theo
July 2010

A more permanent cheaper solution is to place a pushbutton switch in where fuse number 3 should be in the fuse box, This means you will have to remove the siren so it doesn't go off all the time, and when you do remove the siren be sure to have something to muffle it as it has a backup battery and lasts about 30 minutes!
You will loose the function of your remote central locking but its a small price for mobility again!
First pull out fuse 3 in the fusebox near the drivers door, pop the bonnet and cut the siren wires, should be about 5 in total black in colour.
You wont need the siren anymore so if you want to dunk it in a bottle of water or smash it up with a large hammer do so now lol!
Install a push to connect switch, available from maplin electonics, in a convenient place, i would suggest passengers side of the steering wheel area.
Run 2 wires from the switch to where each blade of fuse number 3 goes in, use small spade crimp connections to insert the wires into the slots.
turn your key to accessory then as you crank the motor press the switch at the same time and your car will start up.

Hope this helps

Stu

Stuart Morgan - Neon owner
July 2009

as a temporary solution, take fusebox cover off, locte the immoblilser fuse (yellow one), pull it out, and GENTLY wiggle it back in its hole until the red light stays on solidly, should start then.

i am not a car thief, lol

marmz
April 2009

Try the 'Auto Key Centre' in Newcastle, I have just got a replacement key with an immobiliser fob from them.
Dealer price £150 , the Auto Key Centre £69.
They have a web site.
www.newcastlelockandsafe.co.uk

Good luck.

Gary C.
January 2009