I’m from Brazil, so, sorry about my worst rite:
First: you need removed a spark plug and need some one else to start your engine. Take a spark plug and put it near (about 1/2" of distance) to spark in the moment your engine come a first revolves. Please don’t put your finger or hand closer or between of spark and spark plug. You will see a "shock" with a blue color. White or read is a signal of your module or your bobbin was freak and it’s created a difficult to your engine start or a well functionality.
Second: Nothing happen, may be a spark plug has a rupture and need a change, but you can tested with a voltmeter and it has beam a 800~600 ohms out this parameter need a change. Take another bobbin installed and try a first pass again. If nothing happened go to third pass.
Third: Nothing happen, may be your module was "toasted" and you need some other to tested. You replaced it and try starting the engine again. If nothing happen, check a force cable of module and the others. Possible some need a cleaner or replacement.
Guilherme
November 2007