i have a beko washing machine wma 10 w the problem started with when i put on a load of washing it would jump through the dial and if i put on a light wash it could end up as a strong wash, now the amchine wont start at all when i try to put on a wash
BEKO WMA 10 W THE PUMP WAS JAMED AND NOW IT STOPS IN MID CYCLE
R Lakey
January 2009
these machines suffer from a few diff faults that would cause this type of fault i would 1st check the motor brushes if they are worn the prog will skip. If these are ok i would sugest changing the programer and module as these are a common cause of this fault.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.