How do I remove a General Electric Dual Wave microwave?

hi,
just wanted to add that if you're only going to change the fuse, leave the unit in the cabinet and just remove the 3 screws holding the keypad. The scews are just inside the microwave door, on the right side. (left side of the keypad).

Jeez, wish I would have found THAT out before I spent an hour getting the microwave out of the cabinet.
http://www.howtomendit.com/answers.php?id=62259

cameron again
December 2008

hi howard,
Having a prob w/ my circa 1987 Dual Wave as well tonight.
1. Remove chrome bezel by about 5 allen screws on top, and 4-5 hex-head bolts on the bottom.
2. Remove the filter grate above the microwave by removing the 3 screws locate inside the microwave, just inside the door on the ceiling of the mic interior.
3. Back @ the bottom, where you removed those bezel retaining bolts, there shpuld be about 4 more bolts that hold the microwave to the metal shell that sits inside your mic/oven cabinet.
4. You should be able to slide the microwave straight out about 5-8 inches before the wire harness and oven temp probe wires don't allow any more movement.
Unplug the wiring harness @ the connector. The temp probes hard-wire can be pushed about 8" form the interior of the oven.

cameron (house_of_clouss@yahoo.com)
December 2008