Recent: Home max fs506x?

Mend > Home Heating Systems

Mend Ideal Classic Boiler Pressure Loss Expansion Vessel

pressure loss constantly?

my ideal classic boiler constantly loses pressure and requires topping up every day, could this be due to evaporation in the system , there are no visible leaks in the system .could there be a problem with the expansion vessel/diaphragm. what should the air pressure be in the expansion vessel, and how do you re charge it.

frosty the broken boiler
December 2008
If you drain your system you can then put a pressure gauge on your pressure vessel and see if it correct - I believe they are normally around 12psi but I don't think it is critical. If you get water coming out of the valve your diaphragm has failed. Once that is correct you can refill the system, bleed it and then look for leaks. Don't forget to check the PRV in case that is dripping.

Richard
December 2008

Automatic Answer

We may have found other answers which could help you.

Click here for Boiler Pressure Loss Expansion Vessel

Related Questions ...

Mend boiler pressure heating system
1

expansion vessel pressure?

we have an oil fired combi with a separate free standing 24 litre expansion vessel some 3 metres away. Follo... [Read more]
Mend boiler pressure relief valve
1

ideal combi pressure loss?

when i top up my ideal 280 combi to 1.5 bar water is passed outside via safety relief valve.the pressure go,s ... [Read more]
Mend heatslave full oil
2

Over-pressure on Worcester Bosch Heatslave 15/19?

I'll give you the full story. 2001 Worcester Bosch Heatslave 15/19 oil combi boiler; the pressure gauge showed... [Read more]
Mend pressure heating system expansion vessel
4

Ariston Genus loss of pressure?

Boiler is losing pressure & faults out daily. I have recharged the expansion vessel for CH which seems ok. I... [Read more]
Mend heating pressure engineers
2

vokera combi boiler?

iv had 3 engineers out to my boiler because every four days the pressure had droped to zero. they checked the ... [Read more]
Mend air boiler combi
2

HOW MUCH AIR TO PUT IN EXPANSION VESSEL? POWERMAX BOILER?

I have a Powermax 155 Combi which loses pressure a lot. Ive heard that if you pump up the expansion vessel the... [Read more]
Mend How to mend it?
1

Pressure loss in Ferroli Optima 901 when on timed programme?

On timed programe ie.off mid-day to 5p.m. and from 1a.m. to 7.a.m. there is loss of pressure below cut off poi... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...