Briggs and Stratton Classic 35 where do i put the oil??

Phils right no they dont
bill

bill
December 2008

No they don't.

phil_saunders@bigfoot.com

Phil Saunders
December 2008

On your mower both filler options have dipsticks to indicate the correct level.

pleasant
November 2008

If you fill level with the top of the hole you will seriously overfill the engine with oil. Max qty in both versions of filler on this engine is 600ml. Filling to the hole level would add nearly a litre.

pleasant
November 2008

There are several slightly different versions of the 'Classic' B&S. Either there will be a dipstick with a cap on it and an oil can icon on the cap, which will be obvious, or there will be a screw-in plug on one of the rear corners of the crank case casting. THe plug will have 2 vertical prongs/lugs on it to enable a lever of some sort to be used to unscrew it.

If the plug is at the base of the engine, fill to the top of the hole.

If the plug is at the top of the casing (at the same level as the blower housing), there will be a dipstick attached to the plug.

phil_saunders@bigfoot.com

Phil Saunders
November 2008