I have moved into a new house where only the living room tv socket is connected to the aerial. There is also a jumble of wires next to it which I assume something needs to be done with to allow the upstairs sockets to receive a signal (a bit like connecting secondary phone sockets). Does anyone know how I can do this for myself without having to get in an electrician?
Thanks
whats happened is the person before had an amplifier....it takes one incoming signal from the roof and splits then amplifies it in one box...on the side of this amplifier you will have any number of outputs you need......COUNT THE OUTGOING WIRES thats how many outputs you will need......get them from maplins or b&q maybe....hoping all the wires have connectors on just connect them all up..make sure you get the input from the roof antennae correct all the amps powered by is a normal bog standard 240v plug. Get a decent amp too mate its worth forking out a few extra quid if you can spare it.....if your wires are bare incoming or outgoing get BNC connectors from maplins couple of quid each quite easy to fit....good luck and let me know how you go..............
j
November 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
