kinda tricky this one,you have to dismantle quite a bit to get into the alternator on a ka
remove the plastic inner wing on the drivers side
remove the outer wheelarch / bumper from the front, some times find you are just aswell taking the whole bumper right off, out the way.
remove the drivers side headlight..3, 8mm bolts.
remove the fan belt, turn the bolt on the belt tentioner clock wise to release.
disconect the battery
remove 4 bolts that hold on the a/c pump, dont disconect the pipes.
now you can get to the 4 torx bolts that hold on the alternator, remove these, let the alternator drop down a bit then remove the wires from the back i 10mm nut 2x 8mm nuts
fit new alternator dont fit a second hand one unless you know its a good one
dino
December 2008