basically whats happned is that i was on the way to work and the bike just cut out and hasnt started since its not getting fuel into the cylinder but the jets are all clean and the petrol is getting into the float chamber but not into the cylinder so there for its not starting.
ive had a jet change because of an exhaust and air filter upgrade but it ran fine and that was about 4 months ago i installed those parts.
Same happened to me after fitting new exhaust i didnt properly run in after fitting it which caused piston to seize, had to get it replaced luckily on warranty
Rick
November 2008
suspect holed piston or seizure
glen
November 2008
fuel is drawn it to engine by suction[for ease of explanation]so check engine compression,or lack of
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.