my samsung washer no.p801 is showing e1 what is this?

After much searching I came upon this post.

Thanks very much Dannyboy, this fixed my problem!!

Arthur
March 2009

the user manual advises to clear the hose filter in the back of the machine. remove the hoses and pull out the mesh cylindrical filters. clean them at least once a year. put them back in and replace the hoses.
my problem is e6 and e3, the manual doesnt cover these. ...of course.

joe blow
January 2009

Machine not filling in allocated time.
Check if water is entering the detergent dispenser?
If it isnt, theres a problem with the water inlet valves.

If water is entering the machine, Check the pressure switch -the system that determines correct water level in the drum. Its a round item about 3 inches across with several wires connected, it sits under the top cover. Its an air operated switch which tells the machine water has reached the correct level. Disconnect the thin rubber pipe from the switch and blow down through it to clear any blockage. Switch itself may be faulty but its more likely the pressure pipe or the vessel attached to the other end of the pipe is blocked.

Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html

dannyboy
November 2008