Zanussi?

Also Check the pressure switch -the system that determines correct water level in the drum. Its a round item about 3 inches across with several wires connected, it sits under the top cover. Its an air operated switch which tells the machine water has reached the correct level. Disconnect the thin rubber pipe from the switch and blow down through it to clear any blockage. Switch itself may be faulty but its more likely the pipe is blocked.
Repair and service your own washing machine. Go to www.2ndwave.co.uk/manual.html

dannyboy
October 2008

E10 is a filling issue.check water pressure,inlet hose kinked,inlet valve faulty,drain hose incorrectly fitted (machine syphons water away during the wash cycle).make sure there is no more than 8 inches of pipe pushed down into a stand alone waste pipe outlet.if you have it fitted onto a sink spigot then ignore drain hose syphoning part.

ck
October 2008