Mend Kenwood Food Processors

Mend Kitchen Appliances, Food Processors

Find out how to mend it for free.

Ask Question

Find out how to mend Kenwood food processors

Mend food processors ...

Mend Food Processors

Mend > Food Processors

Kenwood Chef A901 parts?

My Kenwood Chef A901 started smoking. Problem appears to be two small capacitors on the top of the motor. One is marked 250v-MP FO=7mhz 560-7 LDz the other is marked 250v-MP FO=3.8mhz 560-7 LDz. These are both blacked and one is split. Can anyone suggest alternatives as these are not now available from Kenwood and they are being unhelpful.

Malcolm Craven
October 2008

Kenwood Kitchen Appliances, Food Processors Kenwood Chef Started

Hey Malcolm I've got the same problem as you. Can you tell me how you got on?

Iain McNulty
February 2009

these are for sale on ebay

cailin dorcha
January 2009

oops, forgot, all can be got at Maplins very cheaply, there are also kits on ebay

incubatork
December 2008

Sorry jason but thats rubish, all you need to do malcom is replace the capacitors
47nf
150nf
You could also replace the resistors while your at if they are blown
220 ohm
56 ohm
And also the triac

incubatork
December 2008

Hi Malcolm
The speed control circuit board for that machine is now obsolete, the only option is to upgrade the motor with the new speed control system. This could be fitted by some one with some knowledge. You will need I think 4 or 5 new parts for the conversion and they would cost about £75, if you change the machine that would cost up to £249!!
If you need further help just call me on 01273 734424
Jason (Kenwood Service Agent)

Jason (KENWOOD SERVICE AGENT)
October 2008