How do I configure a Zanussi PCB?

Hi Mike, sorry to hear you had a problem with your machine. I'm led to believe requires that I replace the main PCB. Initially I thought I had a problem with the door locking solenoid, which has not fixed it.

Essentially the door locking logic doesnt appear to be working correctly which means the machine wont start the program because it thinks the door is still unlocked. The door clicks a few times, then I get an E40 fault code.

Was this the same problem you had? If anyone else knows what it could be, I'd love to hear from you!

Thank you, good luck with your repair!
James

James
November 2008

press and hold start button and skip button whilst switching on using the machines on/off switch.after 3 secs the display starts to flash.now let go of all the buttons and lights should scroll through.press the cottons button 9 times until it displays codes and then input the code found on the old board 16 digits (numbers and letters).use the skip button and start button to enter codes.once all number are input correctly press start and skip button in together.it will bleep.switch off.switch on.switch off.switch on.it now should allow you to use it as per normal

ck
October 2008