My Dyson DC04 is stuck so that it wont stand up . The flexible bit at the end refuses to go to 90 degrees to the main body.
If I force it I think it will break
Thank you for this very handy tip! The Dyson now working perfectly and standing properly!
Stewart (South Wales)
September 2009
Used the answer on how to get the machine to stand upright and it worked. Many thanks. I only need to know now how to remove the on/off switch!!
Ken. Bridgend, South Wales
November 2008
Thanks to above advice my Dyson is now back in good order. Thanks a lot
Ken - Rhyl
October 2008
Stand behind the vacuum and remove the part on the bottom right of the vacuum that has two different colored pushable parts. Then push the black part that is revealed. Pull the gray portion that is getting in the way when you are trying to stand the handle upright toward the front of the vacuum while pushing the black part at the same time. The gray part should snap forward into position and now allow the handle to stand fully upright. Voila!
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix vacuum cleaners.