cannon caress gas fire?

Can anybody provide a copy of the PDF file Sam mentioned, the link no longer works.
Cheers
Jim H

Jim
April 2013

I used the manual here: http://www.rinnaisales.co.nz/tradesmart/rinnai2/pdfs/installations/190.pdf

I disassembled the pilot burner and injector.

I removed the thumscrew and the pilot shield and then unscrewed the two screws which held on the pilot shield mounting bracket.

I then removed the retaining assembly screw.

I then lifted off the pilot burner and blew that out, and then unscrewed the injector on which the pilot burner stood (using TWO spanners so as not to damage the pipe).

The injector inside was almost blocked with a sort of black charcoal membrane, so I cleaned that out with a cotton bud and put it all back together.

Now my pilot light covers the thermocouple when properly lit!

Sam
December 2009

Wil. I also have a similar problem with this fire. As the fire heats up the pilot flame gets smaller and smaller until it no longer reaches the thermocouple and the fire goes out. If, before that point I cool the pilot assembly with a wet cloth the flame grows back to former size. I have tried cleaning the jet nozzle thin wire. the spreader looks OK.

Chris
November 2008