My dimmer switch has broken and I need to work in that room. I have a spare light switch but not packaging for it, so I don't know how to attach the wires. I have taken off the old dimmer and I have a green wire, a red wire and a black wire.
The light switch on the back has L1 (but also has COM written above it), L2 (with 1 way written underneath it) and L3.
Yes Richard stop replying it will make ME feel great.
Who Cares
October 2008
as far as im aware as a electrian i will try and help you. if you are only switching one switch to one room, then dead simple. connect your positive ( use a multimeter) this is generally red or brown depending when your house was rewired. once you know which is positive connect that that two com. then connect the black or blue to l1. if there is a copper wire there you need to put a earth sleeve over the bare cable and coonect it to the lug which stands generally away some where on the switch ifs its a metal switch. ifs its a plastic switch you dont dont need to connect it to the switch but still put the sleeve on so it doesnt short when you screw th switch back to the wall. after you have done this turn your mcb back on or conncet your fuse carridge back in and turn the power on. this should work if not consult a qualifided sparky.
hope that helped
kelv 2
October 2008
Huh??!!
Confused - but the answer is correct
October 2008
Sad boring fart - this is all I have since my illness stopped me getting out - I will stop replying if it makes you feel better. Please accept my apologies for upsetting you.
Richard Buxton
October 2008
Connect Red and Black to L1 & L2 - The Green is an earth - there should be an earth connection at the back of the wall box - Do not connect Green to the switch.
Take care with electricity - your question suggests that you really don't understand it - might a neighbour help you out?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lighting.