03 FORD FIESTA HEAT RESISTOR REPLACEMENT. COMPLICATED or NOT ?

Not a difficult job (like brushing ur teath) just need a philips screwdriver and the resistor is located under the glovebox at the side nearest the centre-console (bit with radio/heater). It's a small black rectangular shaped object with a molex plug, remove molex wiring plug, unscren the single philips head and pull out resistor. Re-fitting is opposite of removal!

Fraser
December 2008

hi,get your hands on haynes manual from the library this will tell you all you need best of luck

steray
September 2008