Having some difficulty getting a B@Q FLOODLIGHT TO WORK?
INSTALLED A FLOODLIGHT AS PER INSTRUCTIONS. SWITCHED ON POWER TO TEST, BUT UNIT IS NOT ILLUMINATING . I HAVE SET THE LIGHT SENSOR AND TIMING CONTROLS EXACTLY AS INSTRUCTED.
I HAVE CHECKED THE CIRCUIT WIRING ,THE FUSES AND THE CIRCUIT BREAKER - ALL ARE OKAY. DOES ANYONE HAVE ANY SUGGESTIONS????????????????
NEVER EVER EXPERIENCED PROBLEMS BEFORE.
Thanks for your response. I am pleased to say that the unit is now fully operational.
The problem seemed to be that even although I followed the instructions implicitly for the 'walk test' during daylight hours, the unit would not do an initial switch on.
I am therefore assuming that there was must be a problem with the setting of the light detector and /or the instructions!
Anyway I adjusted the settings in the evening and everything is A okay.
But taking your advice , I purchased a small meter and your suggestion to check there was power was going to be my next course of action.
Grateful to you, - thanks a million
eager beaver
September 2008
do you have the means of checking that you actually have a voltage at the light
Michael
September 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lighting.