beko 520 drum banging?

think its just stuffed, sounds like common issue

jason
September 2008

i got a feeling this is packing that was not removed when machine was delivered/installed if you have the instructions read the set up instructions ,
take out polystyrene and try machine again .

wirecutterman
September 2008

bit more detail i have checked underneath and th concrete block is bolted on securely at the bottom. and i have also removed the top and again the block is bolted on tight. both springs are in place at the sides but the drum bounces all over th place. if you run with nothing in it spins smooth, if you put anything in you just get a massive bang! i found a large block of polystyrene under neath which i guess stops it from banging? where does it go, any advice greatly appreciated

jason
September 2008