Recent: Safely remove screen protector from a Macbook Air?

Mend > Home Heating Systems

Mend Potterton Suprima 60 Boiler PCB

How can i fix my potterton suprima 60 boiler?

I recently changed the PCB and the Red HT lead lead (which was broken) but my boiler still does not fire up. Can anyone PLEASE help me. All suggestions are welcome. Many thanks.

Joe
September 2008
P.S. MANY THANKS TO IAN!! YOU WAS CORRECT

JOE
October 2008
THANKS TO EVERYONE FOR THIER HELP IN MY STRUGGLES WITH THE SUPRIMA 60.
AT LAST I HAVE HEAT!!! IT WAS THE GAS VALVE WHICH WAS FAULTY.
I HIGHLY RECOMMEND BRITISH GAS PRIORITY BOILER SERVICE. IT ONLY COST £2 PER MONTH AND THE REPAIR COST AN ADDITIONAL £99 (INC PARTS AND LABOUR)WORTH EVERY PENNY!

JOE
October 2008
Hi Joe,

It is possible that the gas valve is faulty, these have a tendency to go open circuit. If you listen carefully to the gas valve when the boiler starts up you should hear a faint clunk as the valve opens, if it is quiet it will be suspect.
If you know an electrician he can check across the 2 outer pins these should read around 3.7k if ok.

Ian
September 2008
Thanks for your reply Baximan.
The answer is YES. Theboiler tries to light up 3 times and then the red light starts flashing until the reset button is pushed.
I can also see it sparking up as if to light but to no avail. With regards to lights on the PCB the green light flashes slowly and then rapidly when its trying to fire up.
Any suggestions are welcome.
Thanks.

Joe
September 2008
does the boiler try to light? are there any lights flashing on the new pcb?
email me
ryanmurphy130@aol.com

baximan
September 2008

Related Questions ...

Mend unit diagram heating
2

Schematic diagram for Potterton 407677 control unit?

I am having problems with the control unit (407677) in my 22 year old Potterton Profile 80e boiler. Does anyo... [Read more]
Mend heating fault boiler
2

fault potterton suprima boiler?

Red light on wont reset .changed the thermistor and it worked for a few days. now gone back to the red light o... [Read more]
Mend PCB Potterton Heating
1

checking potterton pcb?

Hi is there a way to check the PCB board on my Potterton suprima boiler it keeps going into lockout I have rem... [Read more]
Mend boiler potterton problem tank
1

Pottertton Kingfisher Boiler Overheating ?

I have a Potterton Kingfisher Boiler which has a intermittent problem, which is causing the tank to bubble ove... [Read more]
Mend boiler error pcb
1

Potterton promax combi he plus - error message E160?

Hi, I have a potterton promax combi he plus. It is showing error message E160 (fan wiring/ fan error). At f... [Read more]
Mend boiler temperature netaheat
1

i have potterton 50e netaheat bolier stat keeps clicking?

Thank you for your reply that it could be the PCB.But this clicking keeps happening while the boiler is fired ... [Read more]
Mend boiler PCB Netaheat
1

i have potterton 50e netaheat bolier stat keeps clicking?

My POTTERTON 50E boiler will fire up ok but after awhile that it has been working for I will hear the stat in ... [Read more]
Mend boiler central heating temperature sensor
2

Potterton Suprima 80L?

The boiler works with no logout. The lights operate as per the manufacturers manual. After 60 seconds the boil... [Read more]
Mend boiler heating thermostat
1

Potterton?

I've just replaced pcb, 2 motorised valves, thermostar and timer ... but boiler still does not work! The light... [Read more]
Mend boiler heating lockout
3

Potterton Suprima, flashing amber light?

I had the dreaded PCB lockout issue a couple of years back, and had the PCB replaced. Bolier now works perfec... [Read more]
Mend boiler heating gas valve
1

Hi got a potterton MF RS 60 boiler is sparking but no pilot?

Hi got a potterton MF RS 60, Boiler is sparking but no pilot? Changed gas valve but still same problem also ch... [Read more]
Mend boiler gas valve pcb
1

pilot lamp fails to ignite, potterton boiler profile 50el?

no voltage to gas valve on terminals t2 & t3, checked pcb fuse 1 amp and found ok. Will I have to buy a new p... [Read more]
Mend boiler PCB Potterton
1

Potterton Profile 80E Starts OK on HW but not on CH?

Boiler would start (fan running for 20 seconds) but would not complete the ignition cycle. Replaced the PCB. A... [Read more]
Mend boiler heating temperature
1

diverter valve not operating?

Hi I am having a problem with my potterton performa 28i boiler. Central heating works fine. Dhw giving cold ... [Read more]
Mend boiler pcb ignition
1

Potterton Prima F won't light?

Hello I have a Potterton Pima F boiler that's been giving me problems (2 years ago I had the problem with dry ... [Read more]

How to mend ...

Find out how to mend just about anything howtomendit.com for free repair help, information and advice.
Mend Home Heating Systems ...