fujitsu siemens amilo laptop keyboard settings?

dont have the answer but the same problem with the

i = 5
o =6
u = 4

and so forth.

zahid
June 2013

I luckily came across this page.hey guys I'm so happy,I had this problem that when I pressed ( i ) I got 5, pressed( o ) I got 6 and so on
i = 5
o =6
u = 4
i had to always press the 'fn' button, to change it to lettering, but when I applied the
'' press Fn key and insert/num key at the same time '' according to Baton and Derek, the problem was gone. Thank you so much and remain blessed. Chilongo.

Chilongo.
July 2011

repeatedly press ctrl key and numlock. i have same modle and suffered from same problem and it worked.

geog
October 2010

Not really an answer, more a thank you. I had the same problem, came across this thread and thought I'd test the FN / INSERT / NUM method. It worked - magic! Thank you for the great advice "baton"

AMD
July 2009

you are in num lock
press Fn key and insert/num key at the same time

baton
June 2009

Switch off numlock

derek 2032
December 2008

i dont have the answer but the same problem with the

i = 5
o =6
u = 4

and so forth.

i have to press my 'fn' button, to change it to lettering, how do i remove it!!!

Sinead
November 2008

i understand sir;
but the FUJITSU FMV-7160NU3 have a keyboard layout
like japani or chines;
if i press a then 1a;
if press fn then a;
if press wTHEN search operation open;
if press g then gh open;
if press m then O or if use numlock then mo OPEN;
some keys like a,b,c,d working properly but most providing results those enclose near on the keys;
keypad showing results thats are on also shown on keys except of real uk english keypad

slave_77e@yahoo.com
September 2008

the keyboard setting of my FUJITSU FMV-7160NU3 changed;
if i press L then 5 come;
if press K THEN 4;
IF press J THEN 3;

slave_77e@yahoo.com
September 2008

check your settings in regards to REGIONAL and LANGUAGE which is in the CONTOL PANEL,
i think you may have changed your settings for your keyboard to US instead of UK

acetech (mobile pc technician)
September 2008