Beko WMA 520S : VERY loud banging when on spin?

Brick has fallen out from bottom of my becko washing machine. The bolts have broken at the ends. Can this be repaired? Help shall i scrap it?
If any one can give me some advice.
Thank you

Philomena
February 2015

As well as the concrete slabs there are shock absorbers on the base of the drum. Take the top of the machine off and press down on the block if you are getting excess movement - replace the the shocks.

ITS NOT THE BEARINGS
April 2009

there is a concrete weight on the bottom of the drum.tip the machine on its back and you will see the concrete weight on the lefthand side.make sure this is tight as they come loose and even break off.13mm socket required to tighten the bolts up

ck
September 2008

I would not use this until you get it checked out.
I had the exact problem,and it was just out of warranty.
The weight fell off the drum and my machine was bouncing all over the kitchen and the lid blew off.
I got rid of it as i don't trust this brand. After such a short life and a major break down like this i would nrver buy Beko again.

M. Gill
September 2008

no not really safe to use because sounds like your bearings have gone and it could end up blowing electrics.

paul
September 2008