hi, thanks for your help, we done this but still not right, when its on it moves backwards and forwards about a foot as if the caliper is moving with the disc,
either calliper is loose or the axle "u" bolts are loose!- common on this model.
k
August 2008
If u followed procedure and cranked the caliper lever's manually before you attached the b/hrake cble to close up the pads & then attached cble and adjusted,IT should have worked.2 possibles.Air in the rear calipers needing bled out,or warped discs.Bleed both calipers till fresh fluid comes thru,then cble off,recrank caliper hbrake levers untill pads touch and very little caliper lever movement is remaining,then reattach cble and adj to 4 clicks.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix lorries/trucks.