Just checked in here to try and find code information. Took panel of back of machine to check motor to find multi block connection to motor hanging loose. Plugged back in and machine fine.
dc
October 2015
how much is ment to stick out on the motor bushes i have about 5m
mick
November 2013
my washing is full of water and will not drain, error 7 is showing
chez
November 2010
my haier wash machine show error 1 any time i start it up
handyman5611
March 2010
Thanks for the info i too had same prob so husband tilted machine, tapped brushes and hey presto! we are working again with no repair bills yippee!! thanks again
sherene
October 2009
ER7 is certainly a motor fault, checked the brushes & by chance found that one had stuck in. So, a quick tap & clean up & refitted them, and its all working now.
So - if the machanice is fairly new & ER7 comes up, get underneath the machine aand tap both the brushes first, before calling the expensive Haier repairman.
B. Hill
August 2009
get a new one it's the motor, I will not buy Haier thay are rubbish.
Sam
July 2009
ER7 is a motor fault. Check the carbon brushes..Hope this helps..
Thomas B
August 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
