hello,
If controls not working but pump runs continually even with front on switch off.
Aeg oko favorit, but this trick will probably work on any.
UNPLUG machine from the electrical supply.
Drag machine forward from under the bench - about half its depth [ you can leave the water & drain hoses connected if they are long enough ].
Get dog towels.
Open the door, grab the case top edge & tilt the machine backward.
A large puddle will form on the floor - kick in dog towels to soak it up.
Remove towels.
Put the machine back into place - taking care not to trap hoses or cables.
Plug machine into electrical supply.
Machine should now work. .
Tell your friends that you simply emptied the Anti-flood device of water which should not have been there.
tinker
December 2008