Mend Beko Washing Machines

Mend Household Appliances, Washing Machines

Find out how to mend it for free.

Ask Question

Mend repair fix Beko washing machines

Mend washing machines ...

Mend Washing Machines

Mend > Washing Machines

Beko WMA1715S - Water doesn't flow, 1st operation?

All,

After the start button is pressed I hear a buzz (as though the machine is drawing current) and then it stops. I think normally the water flows to the front draw where the powder / tablets are, but this does not happen.

I'm thinking perhaps a problem with a solenoid valve?

Does anybody have any thoughts?

Thanks

Scott
July 2008

Beko Household Appliances, Washing Machines Flow Start Button

Have had the same problem, prewash light flashing right hand side of machine. The shop I purchased machine from have spoken to their Engineer and it's a case of re-setting the machine. Have told me how to do it and the machine's working again - fingers crossed!
Turn power button off (not at wall)
Select 90 degree wash
Press Start and Cancel button down at same time for 3 seconds and turn power button on whilst still holding buttons down - Start light will flash.
Leave power on.
Select any Spin position.
Press Start and Cancel button at same time again for 3 seconds - other buttons may start to flash - if they do, press Start and Cancel button together again for 3 seconds.
Machine should be re-set ready for use.
Good luck!
All we need now is for the rain to stop!

Ghanashyam Master
October 2009