I have a cannon professional 1000 with fan assisted oven and conventional oven. The fan assisted oven is not getting u to temeprature, the fan is working and the light is on etc but it doesn't get above 50 dgrees or so. Rest of cokker - hobs, conventional oven etc all working fine. Is there a fuse or thermostat I need to replace?
Thanks very much for your advice. Now cooking a roast in a fully working fan oven - cost me £8 and 15 minutes to fit thanks to you!
Jerry G
Jerry G
July 2008
Gerry G
Hi, have just replaced the element - it works a treat again!!! hubby says very easy to change, just take out the side runners and remove 4 screws holding the back plate in (he discovered that after dragging the cooker out completely!!). only took about 15 mins to do.
I got mine off ebay (seller - appliancesparesuk) - next day delivery for £4.99 plus about £3 p&p - had seen it elsewhere for £31.95 + vat + delivery!! used the ref no. 10455G for some reason not listed at the Cannon professional.
hope you get it sorted soon - so much better that the little oven!!
gypsyladykate
July 2008
gypsyladykate!
Thanks, I was guessing it might be the element. I would be very interested to see how you get on, ease of putting new element in etc. At least we have a back up oven but things take so much longer to cook!
Jerry G
July 2008
I have the same cooker with the exact same problem. hubby reckons it is the element that has gone so I have found a replacement on ebay for about £7 in p&p. (it is listed under a different number rather than 1000)(found that by looking on lots of websites about the oven) will let you know if that cures it when it gets here!!
gypsyladykate
July 2008
Automatic Answer
While you wait for answers, we may have found some information which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix electric cookers.