Zanussi washer-dryer WJS 1265W?

did that sill not working

tommy
October 2009

What is de error code E90 on Zanussi washer-dryer WJS 1265W

Dianelys Gutierrez
September 2008

Fantstic! I had the same problem with mine and got my Dad to follow your instructions and now my machine works as new! Thanks you soooooooo much :-)

MizCarter
June 2008

What is Error Message E20

Paul Dawe
November 2007

Hi,

I have had the same problem. Take the top off, remove soap drawer, take out the 2 bolts on the front corners (they face skyward), remove the 2 screws behind the soap draw and then remove the front panel (levering out the retaining clips on top). From the front on the right hand side and bottom of the control panel is a connector with 4 blue wires, this is the problem. Remove this connector, clean it with wd40 and make sure it's dry. You may need to very gently squeeze the connectors together with a pair of pliers to make a tight connection (be gentle). Put it all back together and this should solve your problem, it did for me. Good luck

Emjay
September 2005