If you get new parts it`s an easy diy job. just time consuming lining up the rods. The best way is when removing the originals mark the shafts and the old joints. Copy the marks onto the new joints and align them on the shafts when re-fitting. Should be a straight forward job but you may have to fine tune. thats how I did my own.
Working Man
July 2008
happens all the time.dealer parts,not hard to do,more fiddly than anything else.
caine
July 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
