How can i fix my washing machine,zanussi aquacycle 1000 (2)?
When I use program D the water fills to below the gasket,about half inch in bottom of Drum.This is occuring for all wash cycles.drum then turns as if going through normal cycle.It seems that the water enters for a given time, sufficient only to flush the detergent into the drum.Appreciate info CK.Ta
If you remove the lid and find the pressure switch (this is the round bit under central bar with a small black pipe connected to it and wiring).Now remove the black pipe from the pressure switch and start the machine on a D program.with this pipe removed the machine should keep filling and filling till it floods,so try it for a short while whilst watching it and see if it fills to a higher level.If it does then this could be something to do with your fault
ck
July 2008
I can answer this question...
How can i fix my washing machine,zanussi aquacycle 1000 (2)?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.