Mend Sears Film Projectors

Find out how to mend it for free.

Ask Question

Find out how to mend Sears film projectors

Mend film projectors ...

Mend Film Projectors

Mend > Film Projectors

How do I thread a Sears Du-All Super Eight projector?

My model is 9204 and I just need the diagram of how to thread the film.

Jodi
June 2008

Sears Video, Film Projectors Sears Model Diagram

I have created a diagram so its easy to understand . I suggest printing it out and taping it tto the inside cover of the projector for safe - keeping.
to get it, email me at laurakurella at yahoo.com

Laurakurella
January 2014

can someone email a picture of how this film is threaded to me on this Sears Du- All 9233. fcefxer at yahoo dot com

Nancy
May 2013

thank you very much that will be great if I could get the instructions

terri
November 2011

I have the book. Power switch to motor. Pull the threading lever, black knob, down. Then place film between the metal rollers. When about 6 inches of film has gone in or clicking of the shuttle can be heard, gently release threading lever.

Ron
October 2009

What you do is you put the film real on and then you thread it though all the little reals and pullys and then put it on the empty roll on the opposite side of the full roll, remember put the full reel on the top and the empty one on the bottom.

Steven
August 2009

I have a model 584-92040 that I managed to get working today. If you still need instructions and think this might be close to what you have, we'll need to get a picture to you. I couldn't explain it verbally.

Angelo
February 2009