What's wrong with my Creda T630CW Condenser Tumble Dryer?

no heat will be the thermastats as the back. cheap fix about 13.00 quid >easy to fix too. just make note of the one with green dot and note colour of connections.

sue from leeds
November 2012

when i press the start button it just buzzes

del hannaby
February 2012

My T630CW tumble dryer has stopped drying ( no heat ) Everything else works. How do I find out whats wrong or what items do I check first ?

Bob Harley
December 2009

My creda t630cw condenser dryer has done the same after two years. Using the information provided on this page I have fixed mine too.
Many Thanks

Nancy Paton
August 2004

Duncan

I managed to fix my tumble dryer - as you suggested, it was the relay.

The connections to the T630 relay are on two rows of 3 pins. Looking at the relay when it is fixed in place, the connections are:

Top Left - 2 x red wires
Top middle - Red & White/Blue
Top Right - Single Red

Bottom Left - Black & Grey
Bottom Middle - 2 x White/Blue
Bottom Right - White/Blue and Blue

Hope this helps

Michael
July 2004

Hi Michael,
We have the same problem with a creda condenser dryer T622CW model.
After a lot of searching we were told that 9 times out of ten it is the starter relay that is faulty, Which is behind the start button.
I ordered a new one ~£20, but forgot to take note of the 6 connections attached before I took the old one off! idiot!
I tried some trial and error last night but no good,
If you could tell me the connection order or better yet take a couple of photos and email them, I can try it out and tell you if it fixes the problem.
My email is dslade@platform8.com.
Note: take the top off first, we bust a few things on the front panel as we forced it off,idiot again!
Regards

Duncan Slade
01684 591591

Duncan Slade
July 2004