how do you change the cupling on a Kenmore 80 series washer?

OK...let me see...Start by removing the two screws on each end of the console. These screws may be covered with a plastic piece at each end. Once the console is loose flip it back and let it rest there. Disconnect the lid switch plug and put a screwdriver on those metal clips and push the screwdriver handle toward the back of the washer to remove these. Once that is done you can stand in front of the washer grab the cabinet and rock it forward. The whole cabinet will come right off, just set it aside. Bottom of the washer now, remove the clips holding the pump in place and pull it forward off the motor shaft and place it out of the way with the hoses attached. Unplug the motor switch and then remove the bolts and clips off the motor and then pull that forward to free up the motor. You will see the coupler on the other end of the motor shaft and in the gearcase. Just remove them and reinstall.

JP
July 2005