Aprilia Tuareg wind 125 with a rotax 123 engine timing?
Hi I have an Aprilia Tuareg 125 with a rotax 123 engine,should the ignition timing be set to 1.84mm BTDC?,mine is set at 1.35 mm and i am not happy with the performance and I noticed power loss between 5000 and 6000 revs.the spring that holds the power valve seems to be very tall when i take the cover off and I was thinking that probably sombody pulled it,do you know how long this should be.Thks
Hi I have a aprilia tuareg 125 don't know if it a ,wind or rally
need ignition barrel , rear shock, speedo cable
can't test it to see if still in good order
can anyone help
chris
October 2015
hi do you know what fork oil i need for a 1993 tuareg rally 125?
ash
November 2009
the spring length is 36.5mm loose
timming should be set to 1.30mm btdc to 2.03mm btdc my rs is set to 1.7
mike
August 2009
hello i am after some info on the tuareg can you help? i need a workshop maneul too in english#!!!
michael
April 2009
ay up dunno if uv fixed it yet but here is an online manual there is a section on timing it and a section on the power valve. just finished putting mine together, and it came in handy.
http://homepage.ntlworld.com/shawn.wombwell1/aprilia%20index.htm
Az Hattie
May 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix motorcycles.