How do i bleed the brakes on a 94 cavalier?

You could also gravity bleed them or using a vacum bleeder device to suck air out of system if your working alone.....
Take master cylinder cap off and make sure its ful of fluid and then open all bleeder vavles til they are all dripping good ..close off all vavles and top off master cylinder ...

bg
November 2005

It will require two people. One to depress the pedal and other to open/close the bleeder at the end ot the system you worked on. This car has four lines comming from master cylinder. if your line is to a caliper you open the bleeder about 1 turn and then have the person push pedal down slowly, as the pedal is being depressed and fluid/air is comming out of the line, close it. then tell the pedal pusher to release pedal. repeat for rear wheel cylinders as well. bleed till oll visable air is out of lines. dont forget to re fill the master cylinder. if you get air in that ill have to post another answer for you. Good luck.

Donald
July 2005