Make sure Service valves are closed Ecomax 828 2e?
I have located the said valves. on the Underside is a Slotted screwdriver shaft with cir clips, is this the valve open close device?
It is rather tight and I don't want to break anything. How many turns might I expect to close the valve.
Kind regards Russell.
Hi John.
Still can't turn Screwdriver slot. Do I have to remove cir clip or something? The unit is near the floor so I can't see details to clearly.
Many thanks.
Russell.
Russell
March 2008
Hi John.
Still can't turn Screwdriver slot. Do I have to remove cir clip or something? The unit is near the floor so I can't see details to clearly.
Many thanks.
Russell.
Russell
March 2008
Thanks John.Just wanted to be sure it was the valve control, not some other part that might cause a catastrophe.
many thanks Russell.
Russell
March 2008
If I understand you correctly, the valves you mention have 1/4 of a turn from fully open until fully closed. One valve each side of the pump, and one valve on the other pipes.
John
March 2008
I can answer this question...
Make sure Service valves are closed Ecomax 828 2e?
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix baths and showers.