Mend > Vacuum Cleaners

How can I fix the suction problems on my Eureka Whirlwind Lite?

My Eureka Whirlwind Lite (Model 410 Type AT-1) has zero suction, and makes no noise while in "floors" mode. When I switch it to "carpet" mode, there is still no suction but the brush is spinning fine. Is this fixable? I've opened up the dust cup and looked inside, but see nothing obvious. We have a dog so it gets a lot of use -- did I kill it? Help!

Julie Saxton
June 2005

Eureka Eureka 410 Household Appliances, Vacuum Cleaners Vacuum Carpet Repair

More than likely, you have a clog in the onboard hose. Make sure the vaccuum is unplugged from the wall. Remove the 2 phillips head screws on the back of the handle near the power cord inlet and pry the back part of the handle off. This will allow you to detatch the hose.
Then run a long, thin stiff rod through the hose - a half inch pipe works well, as would a narrow broom handle. Do this several times to remove all of the pet hair, dust, paper, etc. that is clogging the hose, then re-assemble the unit - your vaccuum should suck as good as new!

David Morgan
January 2007