Veritas 8C blowing mains fuse on control panel?

Hello there,

I have a problem with my Veritas 8C.

Over the past couple of weeks the alarm has gone off a couple of times and was easily reset using the code.
Yesterday I found that the power light had gone out. After investigating, it turned out that the fuse in the mains terminal had blown.
I replaced the fuse and everything was ok.

Now I have just found that the control panel is completely dead, no lights at all. I suspect the fuse again, but due to it being the middle of the night, I'm too tired to investigate tonight.

If this mains fuse has blown again, what is the most likely problem?


Steve