baxi combi 80 eco no hot water?

i have just moved in to a flat the boiler has been turned of for six months turned it back on but it will not fire up. I also have no radiators on so just need to the hot water will this stop it as there is no presure.

jonty35
April 2012

Do you have to be corgi registed to carry out this job as i have the same problem

Rick
February 2011

Had same problem.
It's the diaphram that controls the water flow. I purchased a service kit and it cured my problem. To check if this is your problem, drop the front, turn on the water and check if the small pin protrudes and makes contact with the switch. (you will see what I am refering to).
http://www.ezypart.co.uk/parts/part_id__2262

Ken Shier
March 2008

the pump is purely for the heating & has no bearing on the hot water. the problem you have are genrally the symptoms of either the diverter valve or the flow switch. check in your user manual for identifications of these parts.

gary harwood
March 2008

I have the same problem. The boiler lights and the pump runs but no hot water yet rads are hot?

Derek
March 2008