i av fitted a knew pcb to my zanussi dishwasher and know have no lights on the pcb at all .apart from the power light on the on off switch . and when i put my old pcb back in i have same problem .but the machine worked before just didnt heat up.does anyone av a idea wot iv done
when you connected the pcb there was a 2 way insulated spade connector on the end connection of pcb (might be green).if you have reversed it and fitted it upside down then you will get discribed fault.fit it the otherway up should solve problem
howtomendit.com for free repair help, information and advice.
