Citroen Xantia Suspension?

Does anyone know where I can by obselete citroen Xantia 1.6 M reg suspension parts

Ian Anstee
July 2011

!!!!!! Now one has answered the question !!!!!!


He has new spheres all round and is driving in normal ride hight. And the car is still bouncing.com??????

jay
October 2010

How do i stop the bouncing on my xantia.
Fluids okay bounces every where.
Does it need bleeding if so how do i do this. Please help.....

Paul from Ireland
October 2010

My garage is having trouble in removing the O/S/Rear sphere/globe on my Xanita 1.9 TD. Mileage 126000. Spheres last changed 70K. If they force the sphere to turn, they fear that the aluminium bracket that the sphere is attached to will bend, break, shear off and cause more trouble. Does anybody know how to sort this problem out. Are the attached brackets expensive, either to buy, or fit?
Many thanks

Lloyd
January 2010

dont worry its normal bcs you shuldint drive on hi or low setting.

fadi zayadin
November 2009

i am having the same problem
will prob find out the reason why tomorrow will let you know
where did you get your spheres from and how much did you pay for yours even finding them seems to be hard
i know you have to spend a lot of time bleeding to get it wright

paul
September 2009

I got in touch with WESTROEN,they are on the net, Doug Westland.He only deals in citroen suspensions.First class advice and cheapest repairer.0161 881 1061 .He is a small buisness in manchester,I travelled there from north wales and other people have travelled further.I have a Xantia TD lx.

Tom
March 2009

Sorry, I am really trying to get an answer as I too have had 4 spheres fitted to a 2000 xantia estate with the same result, a bit like driving a space hopper; as if it was on the higher setting. The front had gone up a bit and the back had gone down; this was adjusted.
Anyone know how to stop the bounce?

George
February 2009

when on low you should not be driving as its only lowered to able to lift heavy items into boot. when on high setting it is to give clearance over rough terrain (ie farm tracks) so you should go slowly and the book says there is no suspension on this setting.

alan
August 2008

Dave. I had all the front/rear sphere`s changed for NEW 1s apart from the sphere on the back axle (middle) which has not been changed. Would this be the cause of my bouncy suspension?

Mark
February 2008

hi mark xantia suspension very simple low setting service use only, high setting service use only,next line down for low speed high ground clearance use only . if in high solid ,normal if in low solid ,normal.if bouncy in normal setting spheres plain and simple if ride height ok. were spheres fitted new ,and have they been changed? they can be a pain to remove

dave
February 2008