Kenomre Series 90 (model110) motor runs, nothing turns?
I have a Kenomre Series 90 (model110.26902692)
the motor runs, but nothing turns (aritator or whatever it is called.
I found instructions here to open up the thing, and can see nothing that looks wrong; I can turn the tub by hand;
I even plugged it back in (hooked up the lid sensor) and turned it on and I saw the motor spinning towards the front of the washing machine, by what appears to be the pump (two hoses coming into it).
It make a clicking like noise, but I'm not sure if it is an abnormal noise, or maybe the pump or something.
Anyone know what is going on , or what I should do next?
OK,
I turned the unit onto the back, so I could get to the bottom, and looked at everything closely. No clues to the problem.
So, I saw the motor appeared to be easy to remove, just 2 straps. So, I took those off, and took off the motor, and found to coupling (or whatever it is called) between the motor and the unit that connects to the agitator was broken.
I when to a site for parts (I bought the igniter for my dryer) and entered the model number, and it listed the broken part at the top of the list:
http://www.repairclinic.com/SmartSearch/SSPartDetail.aspx?PartID=1195967&PPStack=1
So, I ordered this, and hope to have everything working again as soon as this part arrives!
Ken
January 2008
One thing further, I showed my wife what it looks like, and when I turned it on, it makes a ratcheting sound (setting is for spin cycle).
Ken
January 2008
Automatic Answer
We may have found other answers which could help you.
howtomendit.com for free repair help, information and advice.
Try fixfault.com to fix washing machines.