we have a zanussi DE 6765 and it is coming up with code AL3?
Hi we have a AL3 code any ideas? the dishwasher completes most of its cycle and just before it finishes up comes this code, it happens on all the settings except "Rinse", the units filters are clean - water supply is good and it drains fine, there dosn't seem anything else wrong with the machine hope you can help, thank you.
Check to see if the water is heating up during use. I have the same problem and have realised that the water is cold which probably means a faulty heating element or connections. Hope this helps as I am looking into mine.
Tej
March 2008
Check to see if the water is heating up during use. I have the same problem and have realised that the water is cold which probably means a faulty heating element or connections. Hope this helps as I am looking into mine.
Tej
March 2008
Firstly I put the wrong model on this enquiry, its a DE6965, I have managed to repair this item - it was the power supply to the heater element, all it needed was two terminals soldered on the control module - total cost £0.00.
Pete.
January 2008
I can answer this question...
we have a zanussi DE 6765 and it is coming up with code AL3?
howtomendit.com for free repair help, information and advice.
